Spare

Description Ozone Clamcleat Neoprene Cover for V4 bars Replacement cover with no magnets to suit the Ozone V4 Click in bars produced from 2019 onwards. OZONE's latest 2021 V2 one pump max-flow hose locker ring. Use to secure "max flow" hose to one pump...

Description This is a replacement shorter  length de-power line for compact or wakestyle bars. This de-power line can be fitted to any Ozone bar, BUT you would need to shorten for rear lines by the same amount. This depower line can be used to convert a...

Description This is the screw in main valve used on all Ozone kites. Remember to check under the black rubber seal for sand, if there is any sand under the seal it will cause the kite to have a slow leak.

Description: Retrofit stainless steel ring for Ozone's Re-Ride release system, used on select 2016-era snowkite control bars. The ring locates into the Click-In Loop's rotating internal core and is where the kite leash attaches to the flag-out system. Specs: Stainless steel construction Re-Ride release...

Description: Genuine Ozone sheathed Dyneema bridle line, sold by the meter, for replacing worn or damaged bridle lines on Ozone kites. Specs: Grey, 300kg breaking strength (10-300) Sheathed Dyneema construction Sold per meter

Description: Replacement safety flag-out line for Ozone Race V4/V5 and Foil Race V4/V5 control bars. One end connects to a front flying line, the other to the stainless steel swivel ring at the base of the chicken loop, keeping the flag-out system working smoothly....

Ozone Sticky-Back Dacron is a heavy-duty, self-adhesive polyester fabric engineered primarily for repairing kiteboarding kites, wings, paragliders, and sails. Sold by the linear meter, it provides a continuous sheet of material (roughly 140-144cm wide) used to fix major tears or structurally reinforce high-stress areas.

Replacement PU-covered Amsteel depower line for Ozone push-away Megatron chickenloop, race bar length.

Replacement Clamcleat with base for the Ozone Contact Water V4 control bar.

Set of 4 replacement screws for attaching Ozone kiteboard pads and straps.

Refresher gasket set for Ozone kite pumps (fits V2/V3 and most other brands). Clean, re-grease, and swap out old gaskets to get your pump feeling like new.

Genuine Ozone rib batten repair kit for the Pocket Rocket parawing.

Ozone webbing strap material, sold by the meter. Genuine replacement material for harnesses, pads and straps.

Genuine Ozone replacement leader lines (pair) for Parawing control bar.

Replacement pressure gauge for Ozone pumps.

Replacement component for 2014-2018 kite models equipped with the Megatron II push-away release and Contact Water system. One end attaches to a front fly line, while the other connects to the stainless steel swivel ring positioned at the chickenloop's base.

Replacement Clamcleat Trim Line for Contact Water V4/V5, Foil Contact Water V4/V5, Wakestyle V4/V5 and Compact V4/V5 control systems.

Description Replacement bladders for the V11 Ozone Edge are the OEM bladders with the valves already on the bladder and ready to install into kite. Each bladder is the same high quality construction that Ozone brings to everything they produce. If you would like...

Description Replacement bladders for the V11 Ozone Edge are the OEM bladders with the valves already on the bladder and ready to install into kite. Each bladder is the same high quality construction that Ozone brings to everything they produce. If you would like to...

Description Replacement bladders for the V10 Ozone Edge are the OEM bladders with the valves already on the bladder and ready to install into kite. Each bladder is the same high quality construction that Ozone brings to everything they produce. If you would like...

Swivel Cone Ozone This Ozone Swivel Cone is a spare part for your Ozone Contact Water Bar V4. The cone is mounted between your safety system and flagging line. The cone is made from rubber and makes sure your flagging line stays fresh for...

Details Tear Aid patches seal leaks and small cuts in bladders or the kite sail. Tear Aid makes for a great quick fix on the beach if you don't have access to a professional repair center.

Details Self repair one pump V2 valve for Ozone Kites. Just remove your old valve, clean the bladder material and stick this new one down. Just make sure you have it angled the right way as once it's stuck then there is no adjustment! 

Description Ozone Stick On Fast Flow Inflate/Deflate Valve Spare Stick On Fast Flow Inflate/Deflate Valve, this DOES NOT include the red boston valve part.