Spare

Description Ozone Clamcleat Neoprene Cover for V4 bars Replacement cover with no magnets to suit the Ozone V4 Click in bars produced from 2019 onwards. OZONE's latest 2021 V2 one pump max-flow hose locker ring. Use to secure "max flow" hose to one pump...

TwinTip M6x16mm hardware screws are standardized across all TwinTip accessories. This pack includes replacement screws suitable for TwinTip Fins, Board Handles, Flex Bindings and Fix Wake Boots.

The backbone of the repair kit is the Seam Grip glue famous in the outdoor community for its incredible strength and flexibility. The Seam Grip glue not only works wonders seaming kite fabric back together but also works to reattach failing valves. This versatile...

Description TwinTip M6x16mm hardware screws are standardized across all TwinTip accessories. This pack includes 50 replacement screws suitable for TwinTip Fins, Board Handles, Flex Bindings and Fix Wake Boots. Item includes 50x M6x16mm screws

Duotone kite pump adapter Pump adapter piece for your Duotone kite Unfortunately, everyone sometimes loses something. And maybe losing your attachment to pump up your kite is one of the most annoying things to lose. Fortunately, a spare part of the Duotone kite pump...

Nylon repair tape to be used for repair of kite canopy material. 2" x 25' roll. Opaque in color. Magic markers can be used on tape to match kite color. Cut to the size and shape you need.

Description This is a replacement shorter  length de-power line for compact or wakestyle bars. This de-power line can be fitted to any Ozone bar, BUT you would need to shorten for rear lines by the same amount. This depower line can be used to convert a...

Description This is the screw in main valve used on all Ozone kites. Remember to check under the black rubber seal for sand, if there is any sand under the seal it will cause the kite to have a slow leak.

Bladder patch kit for use on any AIRTIME bladder or original manufacturer's bladders. Kit includes 3" x 6" strip of peel-n-stick patch tape, 3 alcohol wipes, and detailed instructions on finding and fixing slow leaks in bladders. Tape is Tear-Aid brand (Type A), a...

Description Made of chromed stainless steel, this Webbing Connector is compatible with the Ace Spreaderbar and will make sure your gear stays in place tightly, comfortably, and securely.

Description: Replacement thumbscrew for the Ride Engine Hyperlock harness spreader bar system, used to fine-tune the ladder adjustment for a precise, secure fit. Specs: Ride Engine Hyperlock harness system Ladder adjustment thumbscrew

Description: Replacement Control Bar with Leaders for the North Navigator Pro control system. Built for precise control with adjustable bar length and tangle-free line storage. Specs: Adjustable 45-50cm or 50-55cm bar length Integrated line winder bungees Soft bar ends Compatible with Navigator Pro (2024+),...

Description: Complete replacement flying line set for the Slingshot Sentry V2 and V3 control bars, precision-wound and reinforced to handle demanding conditions and extended use. Specs: Compatible with Sentry V2 and V3 bars 22m flying lines 500lb outside lines / 800lb inside lines Item...

Description: Genuine Duotone stainless steel safety pulley, a direct replacement part for the safety line system on Duotone control bars. Specs: Compatible with SS16-SS22 bars Stainless steel construction Direct OEM replacement part

Description: A tool-less, elongated KISS screw engineered for securing fin boxes, grab handles, footstraps or bindings on kiteboards equipped with the KISS click'n'go system. The long variant penetrates deeper, making it ideal for thicker pads, boots or twin-tip boards that need more thread reach....

Description: Retrofit stainless steel ring for Ozone's Re-Ride release system, used on select 2016-era snowkite control bars. The ring locates into the Click-In Loop's rotating internal core and is where the kite leash attaches to the flag-out system. Specs: Stainless steel construction Re-Ride release...

Description: Genuine Ozone sheathed Dyneema bridle line, sold by the meter, for replacing worn or damaged bridle lines on Ozone kites. Specs: Grey, 300kg breaking strength (10-300) Sheathed Dyneema construction Sold per meter

Description: Replacement safety flag-out line for Ozone Race V4/V5 and Foil Race V4/V5 control bars. One end connects to a front flying line, the other to the stainless steel swivel ring at the base of the chicken loop, keeping the flag-out system working smoothly....

Description: Repair kit for F-One Reactor inflate/deflate valves (and other Surelock-compatible valves, including Naish and several SUP and Flysurfer models). A cost-effective way to fix a damaged valve without replacing the entire assembly, as long as the valve body itself is in good condition....

Replacement trim handle and stopper ball (with grub screw) for North control bars. Easy-to-reach molded Nylon/EVA design with textured soft-touch grip.

Ozone Sticky-Back Dacron is a heavy-duty, self-adhesive polyester fabric engineered primarily for repairing kiteboarding kites, wings, paragliders, and sails. Sold by the linear meter, it provides a continuous sheet of material (roughly 140-144cm wide) used to fix major tears or structurally reinforce high-stress areas.

Replacement front line pair for North control bars, Dyneema SK99 construction (10m/12m lengths).

Replacement line pigtails kit for Slingshot control bars.

Replacement short-length freeride chickenloop with finger, North's modular harness loop replacement system. Enables closer reach for smaller riders.

Replacement PU-covered Amsteel depower line for Ozone push-away Megatron chickenloop, race bar length.