Spare

Description Ozone  Pro Race Lines offer high performance in light wind and faster speeds on the race course due to the reduced aerodynamic drag. Featuring 2x300kg/2x200kg  4 line sets suitable for a range of Ozone products.Ozone Race Lines are thinner in diameter than our standard...

Ozone Line Set Kite lines Ozone The Ozone lines are available in 20 and 25 meters long and they come per set of four. Two power lines (gray) with a breaking strength of 500kg and two steering lines (red and blue) with a breaking...

Ozone Extension Lines set Extension lines set of Ozone This set of extension lines set from Ozone contains 4 times 2 meter extensions. Two power lines (grey) with a breaking strength of 500kg and two steering lines (red and blue) with a breaking strength...

Description Ozone Kitesurf Front Lines are rated at 575kg breaking strength. Strongest and the least stretch of any lines in the market. Manufactured from DSM SK99 High modulus dyneema which is 15% stronger than previous versions. From 2023 onwards, Ozone front and rear lines are un-sleeved...

Description Bio-based Dyneema® Modular Flying LinesColour coded 500kg front / 300kg back lines are precision cut, pre-stretched, spliced and sewn in our own production facility to guarantee accuracy. We use the highest quality Bio-based Dyneema® – this material has the same performance as conventional...

Ozone Swivel The Ozone Swivel is used on all the bars of Ozone from 2014. This stainless steel swivel can also be used for bars of other kite brands. If you want to extend the life of your swivel, always rinse it with fresh...

Ozone Flag Out Line The Ozone Flag out line is the safety line that runs through the bar along the depower rope. This line gets worn out over time and it"s important that you replace it in time to prevent any possible accidents. Replacing...

Description This is a replacement shorter  length de-power line for compact or wakestyle bars. This de-power line can be fitted to any Ozone bar, BUT you would need to shorten for rear lines by the same amount. This depower line can be used to convert a...

Ozone De-Power Line (PU covered amsteel) for Contact Water V5 and Foil Contact Water V5 The Ozone Chickenloop PU/Amsteel Line is the replacement line that runs from the top of the chickenloop, through the center of the bar, and up to the cleat depower system. This line...

Description This is a replacement extended length de-power line for Race and Foil bars. This de-power line can only be fitted to an Ozone RACE bar.

Depower Line Contact Water V5 Ozone The Ozone Depowerline for Contact Water V5 is the PU coated depower rope that makes sure your bar can function the right way. This Depowerline, as the name suggests is only suitable for Contact Water V5 Bars. Ozone...

Chickenloop + Finger M Ozone This Ozone spare part is designed for Ozone Contact Water Bars with Click-In Loop safety systems. Chickenloop + Finger M Compatible with Ozone Click-In Loop Medium loop & Finger Standard size = M Ozone Chickenloop + Finger M Click-In...

Ozone Click-In Harness Loop Click-In Harness Loop for the Ozone bar With this replacement part for the Ozone bar met Click-In Safety systeem you can interchange the chickenloop easy. De Click-In Harness Loop comes without chicken stick, loop only. 

Description Cleat Base upgrade kit for CONTACT WATER V4/V5 and FOIL CONTACT WATER V4/V5Pre-assembled upgrade kit Includes:- Clamcleat with Ozone Base and screws for V4/V5 Control Systems- De-Power Line (PU covered amsteel) for CONTACT WATER V5 and FOIL CONTACT WATER V5- Clamcleat Trim Line...

Description This big Boston valve (screw valve) pump adapter / nozzle fits on any standard kite pump hose. It works with several large Boston valves (screw valves) on the market today including Ozone (2011 and newer), Naish, Crazyfly, Airush (2015 and newer,) and Switch...

Description Replacement bladders for the V4 Enduro are the OEM bladders with the valves already on the bladder and ready to install into kite. Includes leading edge bladder and strut bladders. Connecting tubes not included as you will just reuse your old ones. The hoses are silicone and last...

Description Replacement bladders for the Alpha V1 are the OEM bladders made by Ozone with the valves already on the bladder and ready to install into kite. Includes leading edge bladder and strut bladders.

Description: This high-performance 5 mm line from Ozone is made of 12‑strand UHMWPE (Amsteel/Spectra), coated with Samthane for enhanced abrasion resistance. Designed for demanding kiteboarding applications—including depower lines, bridles, center lines, slider ropes, spreader-bar configurations, and more—it combines lightweight strength with minimal stretch and exceptional...

Description: The 3 mm Amsteel/Spectra line from Ozone is a high-performance replacement rope used in kite control and bar systems (for example, depower lines, trim blocks, bridles). Made with ultra-high-molecular-weight polyethylene (UHMWPE) fibers—commonly known by brand names Amsteel, Spectra, or Dyneema—this rope offers exceptional strength,...

These extensions go in between your board and handle to increase the handle height by 40mm.  Proving more clearance between the board and handle, these extensions help make grabbing the handle for board-offs easier. Many of the top big air riders now use handle extensions...

Ozone Boston Inflate/Deflate valve cap is a replacement screw cap for Ozone Boston Inflate/Deflate valve from 2011 and newer. Made of high-quality dense plastic material, sturdy and UV resistant. Includes the plastic ring attached to connect to the valve base on your Ozone kite...