Spare

Description North Elasticised Trim Line Top quality German-made extremely high wear Dyneema trim line with a special impregnation coating for resistance to abrasion.

The 11mm dump valve that doesn't really measure 11mm...as far as we can figure out. But hey, who's going to argue, this is the original fast deflate valve from the early 2000's and it's still being used now. This dump valve is on a...

Description This pack contains the foil to board mounting screws and nuts for attaching the Sonar Board Adaptor or Carbon Foil Mast to the DropBox Foil Mounting System. This screw pack is also supplied standard with the North Scoop, Swell and Seek Foilboards.

Ozone De-Power Line (PU covered amsteel) for Contact Water V5 and Foil Contact Water V5 The Ozone Chickenloop PU/Amsteel Line is the replacement line that runs from the top of the chickenloop, through the center of the bar, and up to the cleat depower system. This line...

Description This is a replacement extended length de-power line for Race and Foil bars. This de-power line can only be fitted to an Ozone RACE bar.

Depower Line Contact Water V5 Ozone The Ozone Depowerline for Contact Water V5 is the PU coated depower rope that makes sure your bar can function the right way. This Depowerline, as the name suggests is only suitable for Contact Water V5 Bars. Ozone...

Dacron repair tape to be used for repair of kite leading edge and strut sleeve material. Can also be used on canopy for small repairs. 2" x 15' roll. White in color. Magic markers can be used on tape to match kite color.

60" of 2" wide kite repair tape. Dacron fabric with a pressure sensitive adhesive meant for marine application. Taping minor damage is always the first choice when fixing a kite yourself. Tape is easy to use, the kite is ready for use immediately, and...

OEM valve used on Core kites. This is the inflate valve used on the leading edge bladder. This valve comes on a 4" round adhesive base. The adhesive base has "body" so you're not fighting with thin floppy Tear-Aid when trying to attach it...

Description: This is the official replacement depower/trim rope for Slingshot Compstick bars equipped with the Guardian handle system (below-bar trim). It’s pre-spliced and cut to the correct length, ensuring seamless compatibility and easy installation. Designed to interface with the Guardian depower system, it allows...

Chickenloop + Finger M Ozone This Ozone spare part is designed for Ozone Contact Water Bars with Click-In Loop safety systems. Chickenloop + Finger M Compatible with Ozone Click-In Loop Medium loop & Finger Standard size = M Ozone Chickenloop + Finger M Click-In...

Ozone Click-In Harness Loop Click-In Harness Loop for the Ozone bar With this replacement part for the Ozone bar met Click-In Safety systeem you can interchange the chickenloop easy. De Click-In Harness Loop comes without chicken stick, loop only. 

Description Replacement Cleat Kit for Navigator Pre-2024 Not compatible with Navigator Pro Item Includes:Cleat, Base, 2x screws

Description Replacement Cleat Kit for Navigator Pro Includes:1x Cleat, 1x Cleat Base (Assembled onto cleat), 2x 10-24 x 11.5mm CSK Screws (Assembled onto cleat)Not compatible with Navigator Pre-2024

Description Cleat Base upgrade kit for CONTACT WATER V4/V5 and FOIL CONTACT WATER V4/V5Pre-assembled upgrade kit Includes:- Clamcleat with Ozone Base and screws for V4/V5 Control Systems- De-Power Line (PU covered amsteel) for CONTACT WATER V5 and FOIL CONTACT WATER V5- Clamcleat Trim Line...

Description 2022 Reach Kite Bridle Set. Our high-quality spliced, pre-stretched bridle lines are pre-loaded and measured before cutting to improve accuracy and consistency. This results in reduced shrinkage, reduced elongation and improved longevity. Removing ALL pulleys from the bridle improves safety and gives the kite direct and precise...

Description This big Boston valve (screw valve) pump adapter / nozzle fits on any standard kite pump hose. It works with several large Boston valves (screw valves) on the market today including Ozone (2011 and newer), Naish, Crazyfly, Airush (2015 and newer,) and Switch...

Description Replacement bladders for the V4 Enduro are the OEM bladders with the valves already on the bladder and ready to install into kite. Includes leading edge bladder and strut bladders. Connecting tubes not included as you will just reuse your old ones. The hoses are silicone and last...

Description Replacement bladders for the Alpha V1 are the OEM bladders made by Ozone with the valves already on the bladder and ready to install into kite. Includes leading edge bladder and strut bladders.

Description: The Slingshot Binding Clamp Hardware Kit is a replacement hardware set designed to secure the foot straps or laces on Slingshot wakeboard boots. It's essential for keeping your bindings firmly attached and properly tensioned, ensuring high performance and safety during your rides. This...

Description Set of two replacement kite battens.

Duotone Winding Post Rubber Cord Set Click Bar Rubber bands to keep the lines of your click bar together With these parts you can replace the rubber strings at the floaters of your Duotone Click Bar. Delivery time can be longer than 2/3 days...

Description New generation of V-Distributor for North / Duotone Click Bar.The V-Distributor II has been reworked by North and now has a stainless steel eye and is fixed to the front line with a screw mechanism.This significantly reduces wear and tear on the front...