Duotone Trust/Click Bar Adj. Back Lines Duotone Back Lines will replace your old and used steering lines on the Trust or Click Bar. The Back Steering Lines can stretch out unequally and therefore the kite starts to pull more on one side. All bar...

Description Experience ultimate control and convenience with DUOTONE Adj. Back Lines QC/Click(SS21-onw)(1pair). Effortlessly adjust your back lines for maximum performance, while the quick release system provides a secure and reliable connection. Elevate your riding experience with this essential gear.

Description Experience ultimate control and convenience with DUOTONE Adj. Back Lines QC/Click(SS21-onw)(1pair). Effortlessly adjust your back lines for maximum performance, while the quick release system provides a secure and reliable connection. Elevate your riding experience with this essential gear.

Description New line connectors. Two of each colour.

Description Landing Line with ring and ball

Duotone Trailing Edge Batten 4mm / 35cm (SS19-onwards) (1 pair) Spare battens for Duotone kites The battens on your kite are the rods attached to the trailing edge. These battens help prevent your kite from fluttering. Occasionally, due to inattention, you might accidentally break...

Duotone Selfsticky Airport Valve II Duotone Kiteboarding Valve Duotone Selfsticky Airport Valve II is used on all Duotone kites from 2014 until this day. If your old valve is broken you can easily replace it yourself, all you need is a pair of scissors,...

Description Duotone Pump Inflator Tube with adapter compatible with inflators from 2016 onwards

Duotone kite pump adapter / attachment Pump adapter piece for your Duotone kite Unfortunately, everyone sometimes loses something. And maybe losing your attachment to pump up your kite is one of the most annoying things to lose. Fortunately, a spare part of the Duotone...

Description: A tool-less, elongated KISS screw, engineered for securing fin boxes, grab handles, footstraps, or bindings on kiteboards equipped with the KISS system (e.g. Flysurfer R5/FD5/FlySplit2 and Nobile models). The long variant is designed to penetrate deeper, making it ideal for thicker pads, boots,...

Description Ergonomic high volume single point inflation system with large diameter hose for rapid inflation and deflation. The cap and valve base geometry have been updated for more comfortable opening and closing in colder conditions (when your fingers are freezing). The bayonet style main inflation valve is compatible with most pumps. No adapter needed.

Description Steel. Something about this material inspires confidence. Duotone offers square nuts in stainless steel for anyone who wants to be sure that the square nut can withstand more than the torx bolt. Be aware that a steel square nut needs to be lubricated...

Ozone Swivel The Ozone Swivel is used on all the bars of Ozone from 2014. This stainless steel swivel can also be used for bars of other kite brands. If you want to extend the life of your swivel, always rinse it with fresh...

Ozone Flag Out Line The Ozone Flag out line is the safety line that runs through the bar along the depower rope. This line gets worn out over time and it"s important that you replace it in time to prevent any possible accidents. Replacing...

Description: Nobile PA GF33 fins are made of 33% glass reinforced PA (Polyamide). Fins are made in extremely highly-visible „ultra orange” to let you know where did you drop yo ur precious kiteboard. It features the same durability as G10 Epoxy but is much lighter. 33% glass reinforced PA...

Duotone FS Carbon 30 Fin Set One of Duotone's strongest fins The FS 30 Carbon fin set is made of carbon, which makes the fins very strong! The fins fit any Duotone twintip. The fins are available in two different sizes, 5.0MM and 4.5MM....

F-ONE valve used to connect the leading edge to the struts. Original OEM F-ONE valve on a 4" peel and stick base to replace faulty valves or assemble new replacement bladders.

F-ONE valve used to connect the leading edge to the struts. This is the "L" connector. Original OEM F-ONE valve on a 4" peel and stick base to replace faulty valves or assemble new replacement bladders.

Description North Elasticised Trim Line Top quality German-made extremely high wear Dyneema trim line with a special impregnation coating for resistance to abrasion.

The 11mm dump valve that doesn't really measure 11mm...as far as we can figure out. But hey, who's going to argue, this is the original fast deflate valve from the early 2000's and it's still being used now. This dump valve is on a...